|
|
Post by Flyguy004 on May 3, 2005 6:04:37 GMT -5
I have a reel that I found and dont know what weight line it is supposed to be used for.
On the side of the reel it says Martin Classic MC56. That is the only info I can find.
Any help would be appreciated.
|
|
|
|
Post by Mark Patenaude on May 3, 2005 10:58:45 GMT -5
Reels are not typically spec'd for a specific line weight. They will be given a range of rods weights that the reel can be used for based on weight (how it will balance with the rod), proportions and line/backing capacity.
A good way to check this is to compare the diameter of the spool against new reels being sold. If memory serves me a 3" - 3.25" spool will put you in the 3-5 wt. range.
But like it said you may go with a larger or smaller reel if you feel that it balances with the rod well. Most of the older reels are not made of the aluminum bar stock and will be somewhat "heavier".
f-w-f
|
|
|
|
Post by Flyguy004 on May 3, 2005 11:23:06 GMT -5
Thanks for the information!
|
|
|
|
Post by AgMD on May 3, 2005 17:53:54 GMT -5
The easy answer is that if the line "fits" on it then that is the right reel for the line. Lots of folks will put some dacron backing under the line to bring the line up closer to the rim. Lessens the kinks you sometimes get on that stretch of line that is close to the hub.
What might be a more important question -- how does the reel ballance the rod? Unless you are a perfectionist this ballanc is sort of a loose " if it feels good -- it is good" sort of thing. Consider -- if you were fishing a superlight 6 1/2 foot rod, a big heavy reel might just feel wrong.
AgMD
|
|
